BJQYY - R 9788 FLAT FIRE RETARDENT PAINT

  • MSDS: BJQYY
  • Manufacturer: OCEAN COATINGS INC
  • Product Name: R 9788 FLAT FIRE RETARDENT PAINT
  • National Stock Number: 8010-01-220-5968
Product Identification

Product ID:R 9788 FLAT FIRE RETARDENT PAINT
MSDS Date:01/01/1987
FSC:8010
NIIN:01-220-5968
MSDS Number: BJQYY

Responsible Party
OCEAN COATINGS INC
3333 10TH AVE N
BIRMINGHAM, AL 35201
US

Emergency Phone: 800-462-0800

Info Phone: 205-324-9588

Cage: 0GU91

Contractor
OCEAN COATINGS INC
BIRMINGHAM, AL 35201-0245 US

Telephone: 205-324-9583

Cage: 0GU91

Ingredients

AROMATIC SOLVENT 100 (VAPOR PRESSURE 2.7 MM HG @ 20C)

CAS: 64742-95-6

Fraction By Weight: < 5%

ACGIH TLV: 100 PPM


PM ACETATE (VAPOR PRESSURE 3.8 MM HG @ 25C)

CAS: 108-65-6

RTECS: AI8295000

Fraction By Weight: < 5%


2-BUTOXYETHANOL

CAS: 111-76-2

RTECS: KJ8575000

Fraction By Weight: < 0.5%

OSHA PEL S, 50 PPM

ACGIH TLV: S, 25 PPM; 9293


STODDARD SOLVENT

CAS: 8052-41-3

RTECS: WJ8925000

Fraction By Weight: 20%

OSHA PEL 500 PPM

ACGIH TLV: 100 PPM; 9293


PIGMENT (NOT A DUST HAZARD IN WET PAINT) (VAPOR PRESSURE

Fraction By Weight: 10%

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:INHALATION: ANESTHETIC. IRRITATION OF
THE RESPIRATORY TRACT OR ACUTE NERVOUS SYSTEM DEPRESSION. SKIN OR
EYE: PRIMARY IRRITATION, SENSITIZER.
Effects of Overexposure:INHALATION: HEADACHE, DIZZINESS, STAGGERING
GAIT, CONFUSION, UNCONSCIOUSNESS OR COMA.
Medical Cond Aggravated by Exposure:SEE YOUR PHYSICIAN FOR DEFINITVE
MEDICAL ADVICE CONCERNING YOUR CONDITION.

First Aid

First Aid:FUMES: REMOVE FROM EXPOSURE. RESTORE BREATHING. KEEP WARM AND
QUIET. NOTIFY A PHYSICIAN. EYES: FLUSH IMMEDIATELY WITH RUNNING
WATER FOR 15 MIN. TAKE TO A PHYSICIAN FOR MEDICAL TREATMENT. SKIN:
WASH AF FECTED AREA WITH SOAP AND WATER. REMOVECONTAMINATED
CLOTHING AND LAUNDER BEFORE REUSE. CONSULT A PHYSICIAN.

Fire Fighting

Flash Point:>100F,>38C
Lower Limits:1.0
Extinguishing Media:FOAM, CO2, DRY CHEMICAL, WATER FOG, OTHER.
Fire Fighting Procedures:WATER MAY BE USED TO COOL CLOSED CONTAINERS TO
PREVENT PRESSURE BUILD-UP AND POSSIBLE AUTOIGNITION OR EXPLOSION
WHEN EXPOSED TO EXTREME HEAT.
Unusual Fire/Explosion Hazard:CNTNRS TIGHTLY CLOSED. AWAY FROM IGNITE
SOURCES. HEAT EXPOSED CLOSED CNTNRS MAY EXPLODE. DO NOT APPLY TO
HOT SURFACES. IF USE WATER SPRAY: USE FOG NOZZLE.

Accidental Release

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION (FLAMES, HOT
SURFACES AND ELECTRICAL, FRICTIONAL OR STATIC SPARKS.) AVOID
BREATHING VAPORS. REMOVE WITH NON-SPARKING TOOLS.

Handling

Handling and Storage Precautions:DO NOT STORE ABOVE 120F. STORE LARGE
QUANTITIES IN BLDG DESIGNED & PROTECTED TO STORE NFPA CLASS
FLAMMABLE LIQUIDS.
Other Precautions:DON'T TAKE INTERNALLY. CONTAINERS TO BE GROUNDED WHEN
POURING. AVOID FREE FALL OF LIQUIDS IN EXESS OF A FEW INCHES. NEVER
FLAME CUT/BRAZE/WELD DRIED FILM W/OUT NIOSH APPR'D RESPIRATIOR OR
GOOD VENTILA TION. AVOID PROLONG BREATHING/CONTACT

Exposure Controls

Respiratory Protection:OPEN AREAS: NIOSH APPR'D MECHANICAL FILTER
RESPIRATOR-REMOVE SOLID AIRBORNE PARTICLES OF OVERSPRAY. RESTRICTED
VENTING: NIOSH APPR'D CHEMICAL-MECHANICAL FILTERS-REMOVE
PARTIC/GAS/VAPOR. CONFINED AREAS : NIOSH APPR'D AIR LINE
RESPIRATOR/HOOD.
Ventilation:PROVIDE GENERAL DILUTION OR LOCAL EXHAUST VENTILATION IN
VOLUME AND PATTERN TO KEEP TLV AND LEL BELOW STATED LIMIT.
Protective Gloves:FOR PROLONGED OR REPEATED CONTACT.
Eye Protection:SAFETY EYEWEAR TO PROTECT FROM SPLASHES.
Other Protective Equipment:PREVENT PROLONGED SKIN CONTACT TO
CONTAMINATED CLOTHING.
Work Hygienic Practices:WASH WITH SOAP AND WATER BEFORE EATING,
DRINKING, SMOKING OR USING TOILET.
Supplemental Safety and Health

Chemical Properties

Boiling Pt:B.P. Text:244 TO 388F
Vapor Density:> THAN AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:47.70

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:POSSIBLE COMBUSTION CONDITIONS.
Hazardous Decomposition Products:CARBON MONOXIDE, FUMES, SMOKE AND
GASES FROM THERMAL DECOMPOSITION.

Disposal

Waste Disposal Methods:PICK-UP WITH INERT ABSORBENT. DISPOSE IN
ACCORDANCE WITH LOCAL, STATE AND FEDERAL REGULATIONS. INCINERATE IN
APPROVED FACILITY. DO NOT INCINERATE CLOSED CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.